Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

IRMOF-6: Effect of Partial Charge Method on Adsorption Thermodynamics

A sequence of computational methods were used to examine the affect of partial charge calculation method on simulated adsorption properties of IRMOF-6. First, the electronic structure of IRMOF-6 was computed. Second, the electron density map yielded partial charges from various calculation methods. Lastly, Monte Carlo molecular simulations were performed to obtain the adsorption isotherms of CO2 in IRMOF-6.

Electronic Structure Calculation and Partial Charge Methods

The structure and electron density of IRMOF-6 were converged and computed, beginning with a sample IRMOF-6 structure [1,2], using the open-source Quantum ESPRESSO electronic structure calculator [3,4]. Partial charges for IRMOF-6 were then derived from the converged electron density maps. Parameters for the density-functional theory and partial charge calculations are as follows:

Software Package Quantum ESPRESSO, v5.0.2 [3,4]
Pseudopotential / Plane Wave Basis Set pbe-mt_fhi [5]
Kinetic Energy Cutoffs:  
Wavefunction 50 Ry
Charge Density and Potential 250 Ry
Self-consistent Energy Convergence Threshold 1.0E-07 Ry
Converged Cubic Lattice Constant 25.8421 Å
Partial Charge Methods & Software 1. Bader Charge Analysis [6]; Bader Charge Analysis code [7]
2. Voronoi Partitioning [10]; Bader Charge Analysis code [7]


Density function theory calculations were carried out using the pbe-mt_fhi pseudopotential, which is a non-relativistic norm-conserving pseudopotential created using the Martins-Troullier method and makes use of the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional.

Lattice constants were set to the experimental values [1].

Data Download:

Gaussian Cube Data for Converged Electron Density Map:
irmof6.density.cube.gz

XYZ-formatted Structure and Charges:
irmof6.structure_charges.Bader.xyz
irmof6.structure_charges.Voronoi.xyz

The XYZ files listed above are modified from but are compatible with the standard XYZ format. In the file, the first line gives the number of atoms in the file. The second line lists the cubic cell dimensions in Å. In the remaining lines, the first column lists the atom type and the second through fourth columns give the Cartesian coordinates of the atom in Å, as is standard for XYZ files. The fifth column provides the partial charge of that atom, in e (the elementary charge, 1.602176565E-19 coulombs), as derived using the partial charge methods listed above. We note that the partial charges in column five may not sum to zero. Consequently, the sixth column lists adjusted partial charges, where some of the atoms have a small amount of charge added or subtracted to neutralize the charge of the material.

Monte Carlo Molecular Simulations

The adsorption of CO2 by IRMOF-6 was modeled via Monte Carlo molecular simulations, using an existing force field of CO2, a generic force field for the interaction between the gas and IRMOF-6 structure, and the partial charges obtained as described above.

Fluid Simulation Parameters:

The CO2 adsorbate fluid was modeled via the TraPPE force field [11], which models CO2 as a rigid triatomic molecule with Lennard-Jones sites and partial charges at each atom. The Lennard-Jones parameters and partial charges for TraPPE CO2 are:

Atomic Species σ (Å) ε/kB(K) q (e)
C 2.8000 27.0000 0.7000
O 3.0500 79.0000 -0.3500

IRMOF-6 Material Simulation Parameters:

The constitutent atoms in IRMOF-6 were modeled using the generic DREIDING force field [12]. Each atom has a Lennard-Jones site and partial charge. Partial charges are given in the XYZ structure files noted above. Lennard-Jones parameters for the material atoms are:

Atomic Species σ (Å) ε/kB(K)
Zn 4.0440 27.6950
C 3.4729 78.8880
O 3.0332 48.1900
H 2.8464 7.6520

Cross terms were computed using standard Lorentz-Berthelot mixing rules:

$$ \Large \sigma_{ij} = \dfrac{\sigma_i + \sigma_j}{2} $$   $$ \Large \epsilon_{ij} = \sqrt { \epsilon_i \epsilon_j} $$

Simulation Run Information:

Adsorption simulations were run using the Transition-matrix Monte Carlo technique and the simulation results were analyzed using histogram-reweighting [13] and the method described in Ref. [14]. The equation of state of CO2 was obtained from bulk simulations of TraPPE CO2 as described in "Benchmark results for TraPPE Carbon Dioxide" in the NIST Standard Reference Simulation Website. Parameters for the adsorption simulations were:

METHOD Grand-canonical transition-matrix Monte Carlo and histogram re-weighting [13,14]
Fluid Carbon Dioxide
Model TraPPE [11]
TRUNCATION  
Lennard-Jones 12 Å + Linear Force Shift
Electrostatics 12 Å + Ewald Summation
Probability of Displacement. Move 0.3
Probability of Rotation Move 0.2
Probability of Insert/Delete Move 0.5
Biasing Function Update Frequency 1.0E6 trial moves
Simulation Length 1.0E9 trial moves
Imposed Temperature 303K
Imposed Chemical Potential -136.0 εCC
Equivalent Pressure 111.8 bar
Simulation Cell Side Length 25.8421 Å
Simulation Cell Volume (1 Unit Cell) 17257.720 Å3
Accessible Volume Fraction 0.4333090
Minimum number of CO2 Molecules 0
Maximum number of CO2 Molecules  
Bader 235
Voronoi 240

Results:

IRMOF6_isotherm_master

Figure 1: Adsorption Isotherms of Carbon Dioxide in IRMOF-6 at 303K, computed using GC-TMMC molecular simulations with the simulation parameters given above and the partial charge calculation scheme noted in the figure. Solid lines are the absolute adsorption given in millimoles of adsorbate per gram adsorbate. Dot-dashed lines are the excess adsorption, computed using the Accessible Volume definition.

IRMOF6_isotherm_logscale_master

Figure 2: As for Figure 1, plotted in semi-logarithmic form.
IRMOF6_isosteric_enthalpy_master

Figure 3: Isosteric Enthalpy of Adsorption of Carbon Dioxide adsorbed in IRMOF-6, computed from GC-TMMC molecular simulations using the method described by Siderius and Shen [14].
 

References:

  1. M. Eddaoudi et al., Science, 295, 469-472, (2002).
  2. http://utkstair.org/clausius/docs/atoms/explosivesensors/index.html; Provides XYZ-formatted structures of select IRMOF materials described by Eddaoudi et al. in Ref. 1, Accessed September 18, 2014.
  3. P. Giannozi et al., J. Phys.: Condens. Matter, 21, 395502, (2009).
  4. Quantum ESPRESSO, http://www.quantum-espresso.org, Accessed September 18, 2014.
  5. Quantum ESPRESSO Pseudopotentials http://www.quantum-ESPRESSO, accessed September 18, 2014.
  6. R. F. Bader, Atoms in Molecules: A Quantum Theory, (Oxford University Press, Oxford, 1990).
  7. Bader Charge Analysis, G. Henkelman et al., http://theory.cm.utexas.edu/henkelman/code/bader/, Accessed September 18, 2014.
  8. P. O. Löwdin, Adv. Quantum Chem., 5, 185-1999, (1970).
  9. Quantum ESPRESSO projwfc.x, Accessed September 18, 2014.
  10. P. Politzer and R. R. Harris, J. Am. Chem. Soc., 92, 6451-6454, (1970).
  11. J. A. Potoff and J. I. Siepmann, AIChE J., 47, 1676–1682 (2001).
  12. S. L. Mayo, B. D. Olafson, and W. A. Goddard III, J. Phys. Chem., 94, 8897-8909, (1990).
  13. J. R. Errington, J. Chem. Phys. 118, 9915 (2003).
  14. D. W. Siderius and V. K. Shen, J. Phys. Chem. C, 117, 5861-5872 (2013).
Created August 10, 2015, Updated June 2, 2021