The Journal of Research of NIST reports NIST research and development in metrology and related fields of: physical science, engineering, applied mathematics, statistics, biotechnology, information technology.
For additional information see: About the Journal
Volume 115 |
ISSN: 1044-677X |
Issue 1 |
Issue 2 |
Issue 3 |
Issue 4 |
Issue 5 |
Issue 6 |
An Iterative Image Registration Algorithm by Optimizing Similarity Measurement, p. 1
http://dx.doi.org/10.6028/jres.115.001
Comparison Between the NIST and the KEBS for the Determination of Air Kerma Calibration Coefficients for Narrow X-Ray Spectra and 137Cs Gamma-Ray Beams, p. 7
http://dx.doi.org/10.6028/jres.115.002
Improving Interoperability by Incorporating UnitsML Into Markup Languages, p. 15
http://dx.doi.org/10.6028/jres.115.003
Assessment of Uncertainties for the NIST 1016 mm Guarded-Hot-Plate Apparatus: Extended Analysis for Low-Density Fibrous-Glass Thermal Insulation, p. 23
http://dx.doi.org/10.6028/jres.115.004
Polyelectrolyte Multilayer-Treated Electrodes for Real-Time Electronic Sensing of Cell Proliferation, p. 61
http://dx.doi.org/10.6028/jres.115.005
Improved Contact X-Ray Microradiographic Method to Measure Mineral Density of Hard Dental Tissues, p. 75
http://dx.doi.org/10.6028/jres.115.006
NIST Gas Hydrate Research Database and Web Dissemination Channel, p. 85
http://dx.doi.org/10.6028/jres.115.007
Development and Demonstration of a Method to Evaluate Bio-Sampling Strategies Using Building Simulation and Sample Planning Software, p. 113
http://dx.doi.org/10.6028/jres.115.008
Estimating Volumes of Near-Spherical Molded Artifacts, p. 149
http://dx.doi.org/10.6028/jres.115.009
Linking the Results of CIPM and RMO Key Comparisons With Linear Trends, p. 179
http://dx.doi.org/10.6028/jres.115.010
Precision and Accuracy in Scientific Imaging, p. 195
http://dx.doi.org/10.6028/jres.115.011
Interim Report on the Examination of Corrosion Damage in Homes Constructed With Imported Wallboard: Examination of Samples Received September 28, 2009, p. 201
http://dx.doi.org/10.6028/jres.115.012
Software Assurance Using Structured Assurance Case Models, p. 209
http://dx.doi.org/10.6028/jres.115.013
Introduction: Dental Chemistry of Calcium Phosphates, p. iii
http://dx.doi.org/10.6028/jres.115.014
Diffusion of Ions Between Two Solutions Saturated With Respect to Hydroxyapatite: A Possible Mechanism for Subsurface Demineralizatrion of Teeth, p. 217
http://dx.doi.org/10.6028/jres.115.015
Effects of Addition of Mannitol Crystals on the Porosity and Dissolution Rates of a Calcium Phosphate Cement, p. 225
http://dx.doi.org/10.6028/jres.115.016
Properties of Injectable Apatite-Forming Premixed Cements, p. 233
http://dx.doi.org/10.6028/jres.115.017
Preparation and Properties of Nanoparticles of Calcium Phosphates With Various Ca/P Ratios, p. 243
http://dx.doi.org/10.6028/jres.115.018
An Octacalcium Phosphate Forming Cement, p. 257
http://dx.doi.org/10.6028/jres.115.019
In Vitro and in Vivo Characteristics of Fluorapatite-Forming Calcium Phosphate Cements, p. 267
http://dx.doi.org/10.6028/jres.115.020
In Vivo Characteristics of Premixed Calcium Phosphate Cements When Implanted in Subcutaneous Tissues and Periodontal Bone Defects, p. 277
http://dx.doi.org/10.6028/jres.115.021
Measuring Scale Errors in a Laser Tracker’s Horizontal Angle Encoder Through Simple Length Measurement and Two-Face System Tests, p. 291
http://dx.doi.org/10.6028/jres.115.022
MEMS Young’s Modulus and Step Height Measurements With Round Robin Results, p. 303
http://dx.doi.org/10.6028/jres.115.023
Fracture Toughness of Veneering Ceramics for Fused to Metal (PFM) and Zirconia Dental Restorative Materials, p. 343
http://dx.doi.org/10.6028/jres.115.024
Evaluation of the Propensity of Niobium to Absorb Hydrogen During Fabrication of Superconducting Radio Frequency Cavities for Particle Accelerators, p. 353
http://dx.doi.org/10.6028/jres.115.025
Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management, p. 373
http://dx.doi.org/10.6028/jres.115.026
A Gas Pressure Scale Based on Primary Standard Piston Gauges, p. 393
http://dx.doi.org/10.6028/jres.115.027
An Optical Frequency Comb Tied to GPS for Laser Frequency/Wavelength Calibration, p. 413
http://dx.doi.org/10.6028/jres.115.028
Optical Fiber Power Meter Comparison Between NIST and NIM, p. 433
http://dx.doi.org/10.6028/jres.115.029
A Review of Fatigue Crack Growth for Pipeline Steels Exposed to Hydrogen, p. 437
http://dx.doi.org/10.6028/jres.115.030
Assessing Differences Between Results Determined According to the Guide to the Expression of Uncertainty in Measurement, p. 453
http://dx.doi.org/10.6028/jres.115.031
Variances of Plane Parameters Fitted to Range Data, p. 461
http://dx.doi.org/10.6028/jres.115.032
Acid Neutralization Capacity of a Tricalcium Silicate-Containing Calcium Phosphate Cement as an Endodontic Material, p. 471
http://dx.doi.org/10.6028/jres.115.033
Overlap-Based Cell Tracker, p. 477
http://dx.doi.org/10.6028/jres.115.034

Information Desk:
301-975-3052 Telephone
301-869-8071 Facsimile
library@nist.gov
100 Bureau Drive, Stop 2500
Gaithersburg, MD 20899-2500