NIST logo

Journal of Research of NIST

The Journal of Research of NIST reports NIST research and development in metrology and related fields of: physical science, engineering, applied mathematics, statistics, biotechnology, information technology.

For additional information see: About the Journal

Volume 116

 ISSN: 1044-677X

Issue 1

Issue 2

Issue 3

Issue 4

Issue 5

Issue 6




Issue 1 January-February 2011

 

A Comparison of Methods for Computing the Residual Resistivity Ratio of High-Purity Niobium, p. 489
J. D. Splett, D. F. Vecchia, and L. F. Goodrich
http://dx.doi.org/10.6028/jres.116.001

Workshop on Bridging Satellite Climate Data Gaps, p. 505
Catherine Cooksey and Raju Datla
http://dx.doi.org/10.6028/jres.116.002

Measures, Uncertainties, and Significance Test in Operational ROC Analysis, p. 517
Jin Chu Wu, Alvin F. Martin, and Raghu N. Kacker
http://dx.doi.org/10.6028/jres.116.003

Maximum Likelihood and Restricted Likelihood Solutions in Multiple-Method Studies, p. 539
Andrew L. Rukhin
http://dx.doi.org/10.6028/jres.116.004


Issue 2 March-April 2011

 

The SIM Time Network, p. 557
Michael A. Lombardi and Andrew N. Novick, et. al.
http://dx.doi.org/10.6028/jres.116.005

Geometric Effects When Measuring Small Holes With Micro Contact Probes, p. 573
Jack Stone, Bala Muralikrishnan, and Chittaranjan Sahay
http://dx.doi.org/10.6028/jres.116.006

The Role of Lattice Matching Techniques in the Characterization of Polymorphic Forms, p. 589
Alan D. Mighell
http://dx.doi.org/10.6028/jres.116.007

Re-Optimized Energy Levels and Ritz Wavelengths of 198Hg I, p. 599
Alexander Kramida
http://dx.doi.org/10.6028/jres.116.008

Best Practice Guidelines for Pre-Launch Characterization and Calibration of Instruments for Passive Optical Remote Sensing, p. 621
R. U. Datla, J. P. Rice, K. R. Lykke, B. C. Johnson, J. J. Butler, and X. Xiong
http://dx.doi.org/10.6028/jres.116.009


Issue 3 May-June 2011

 

Selecting Valid Correlation Areas for Automated Bullet Identification System Based on Striation Detection, p. 647
Wei Chu, John Song, Theodore V. Vorburger, Robert Thompson, and Richard Silver
http://dx.doi.org/10.6028/jres.116.010

Electromagnetic Metrology on Concrete and Corrosion, p. 655
Sung Kim, Jack Surek, and James Baker-Jarvis
http://dx.doi.org/10.6028/jres.116.011

Development of Multicolor Flow Cytometry Calibration Standards: Assignment of Equivalent Reference Fluorophores (ERF) Unit, p. 671
Lili Wang and Adolfas K. Gaigalas
http://dx.doi.org/10.6028/jres.116.012

RECIST Applied to Realistic Tumor Models, p. 685
Zachary H. Levine, Benjamin R. Galloway, and Adele P. Peskin
http://dx.doi.org/10.6028/jres.116.013


Issue 4 July-August 2011

 

Vacuum Technology Considerations For Mass Metrology, p. 689
Patrick J. Abbott, and Zeina J. Jabour
http://dx.doi.org/10.6028/jres.116.014

Atomic Force Microscope Cantilever Flexural Stiffness Calibration: Toward a Standard Traceable Method, p. 703
Richard S. Gates, Mark G. Reitsma, John A. Kramar, and Jon R. Pratt
http://dx.doi.org/10.6028/jres.116.015

Improved First-Principles Calculation of the Third Virial Coefficient of Helium, p. 729
Giovanni Garberoglio, Michael R. Moldover, and Allan H. Harvey
http://dx.doi.org/10.6028/jres.116.016

Effect of Calcium Hydroxide on the Fracture Resistance of Dentin, p. 743
Evan R. Whitbeck, George D. Quinn, and Janet B. Quinn
http://dx.doi.org/10.6028/jres.116.017


Issue 5 September-October 2011

 

The Use of Filtered Radiometers for Radiance Measurement, p. 751
Albert C. Parr and B. Carol Johnson
http://dx.doi.org/10.6028/jres.116.018

New Measurement Service for Determining Pressure Sensitivity of Type LS2aP Microphones by the Reciprocity Method, p. 761
Randall P. Wagner, Victor Nedzelnitsky, and Steven E. Fick
http://dx.doi.org/10.6028/jres.116.019

Comparison of Two Dimension-Reduction Methods for Network Simulation Models, p. 771
Kevin L. Mills and James J. Filliben
http://dx.doi.org/10.6028/jres.116.020

Improve the Strength of PLA/HA Composite Through the Use of Surface Initiated Polymerization and Phosphonic Acid Coupling Agent, p. 785
Tongxin Wang, Laurence C. Chow, Stanislav A. Frukhtbeyn, Andy Hai Ting, Quanxiao Dong, Mingshu Yang, and James W. Mitchell
http://dx.doi.org/10.6028/jres.116.021


Issue 6 November-December 2011

 

The Current SI Seen From the Perspective of the Proposed New SI, p. 797
Barry N. Taylor
http://dx.doi.org/10.6028/jres.116.022

Combining Results From Multiple Evaluations of the Same Measurand, p. 809
Rüdiger Kessel, Raghu N. Kacker, and Klaus-Dieter Sommer
http://dx.doi.org/10.6028/jres.116.023

Long-Term Stability of the NIST Conical Reference Transducer, p. 821
Steven E. Fick and Thomas M. Proctor
http://dx.doi.org/10.6028/jres.116.024

Microhotplate Temperature Sensor Calibration and BIST, p. 827
M. Afridi, C. Montgomery, E. Cooper-Balis, S. Semancik, K. G. Kreider, and J. Geist
http://dx.doi.org/10.6028/jres.116.025

Findings and Recommendations From the Joint NIST—AGA Workshop on Odor Masking, p. 839
Nancy Rawson, Ali Quraishi, and Thomas J. Bruno
http://dx.doi.org/10.6028/jres.116.026

*
Bookmark and Share

iso logo
Contact

Information Desk:
301-975-3052 Telephone
301-869-8071 Facsimile
library@nist.gov

100 Bureau Drive, Stop 2500
Gaithersburg, MD 20899-2500