Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Taking Measure

Just a Standard Blog

How the JFK Assassination Bullets Were Digitally Preserved at NIST

3D animated GIF of multiple Kennedy bullets with black background
The text at lower right refers to exhibit numbers assigned by the Warren Commission (beginning with “CE”) and the Federal Bureau of Investigation.
Credit: NIST

They were long, round-nosed rifle bullets. Their copper metal jackets had the dull color of a worn penny, giving testimony to their age. The gun-barrel rifling impressions on their sides were typical of a bullet fired from a military weapon: four grooves and the resulting ridges called lands — all these marks twisted toward the right by the barrel’s internal rifling. Alongside the bullets were bullet fragments that revealed the contorted deformation of the lead and jacket metal when they expended a huge amount of energy upon impact.

These items were very typical of firearm evidence that I examined in my 30 years as a forensic scientist. However, what was not typical, and somewhat alien for me, was the setting: a secure room at the National Archives and Records Administration (NARA) in College Park, Maryland.

Although the fired bullets were not unusual looking, they were extraordinary historically. These were the bullet artifacts from the John F. Kennedy assassination.

My former crime-laboratory supervisor at the Bureau of Alcohol, Tobacco, Firearms and Explosives recommended me and our NIST forensic research team to help NARA preserve the JFK assassination bullets — by transforming them into a virtual form.

a bullet inside a small glass vial
The bullet that struck both President John F. Kennedy and Texas Gov. John Connally, carefully preserved inside its glass vial prior to scanning. Known as the “stretcher bullet,” it was found on Gov. Connally's stretcher after he was taken to the hospital.
Credit: J. Stoughton/NIST

A Bit of International and Personal History

I distinctly remember where I was when I heard that President Kennedy had been assassinated in Dallas on Nov. 22, 1963. My family found out about it the next day via a Voice of America radio broadcast where we lived in West Germany. My father was in the U.S. Air Force and was stationed at a USAF-NATO airbase. I was 8 years old, and my family lived in a village just outside the base.

President Kennedy was revered by the German populace, primarily due to the U.S. response to East Germany building the Berlin Wall in 1961. It was typical to see his portrait in German households. Thus, the outpouring of grief was probably as strong in Germany as it was in the U.S. My own sadness was paired with the anxiety and sadness of my father and mother, who were concerned that the assassination might have been perpetrated by an enemy nation, and, if so, the NATO base where my father worked might be called upon to send out its fighter-bombers in retaliation.

Little did I know how intimate I would someday become with the physical objects that ended the president’s life.

a bearded man with glasses inspecting an AR-15 assault-style weapon
I have been a forensic scientist since 1980. Here I am in 2005 at the Bureau of Alcohol, Tobacco, Firearms and Explosives, where I specialized in firearm-related examinations from 1994 to 2008.
Credit: ATF

A Preservation Conundrum

In addition to many other items collected during the investigations that followed the assassination, the bullet and two bullet fragments that killed Kennedy and injured Texas Gov. John Connally are housed at the National Archives in a secure and climate-controlled environment. These items are closely controlled by NARA experts, as are a bullet that the assassin Lee Harvey Oswald fired from the same rifle seven months earlier in his attempt to assassinate retired Maj. Gen. Edwin Walker and the two bullets that the FBI test-fired from Oswald’s rifle after the Kennedy assassination.

Researchers or investigators sometimes inquire about seeing the assassination bullets, but NARA officials rarely release them for physical examination. Instead, photographs of the bullets have been made available to researchers. However, the technology was now available for an improved means of dissemination and preservation: creating virtual copies of the bullets and bullet fragments. If the actual ballistic items were accurately measured in 3D, then the National Archives could release the virtual copies for examination without risk of damage to or loss of the originals.

NIST had the instrumentation and metrological expertise to produce such virtual copies — virtual copies that can be rotated on a computer screen and viewed from any angle, with detail down to the microscopic level that couldn’t be seen even if one were holding the actual bullets. But how were we to accomplish this, since it would be impossible to move our huge research microscopes to the National Archives to scan the bullets? The answer was to have NARA officials bring the artifacts to NIST and witness the measurements being carried out.

And that is what happened.

a man looking at a computer screen with a large image of one of the scanned Kennedy bullets
Physical scientist Mike Stocker views a computer screen showing a preliminary 3D bullet model stitched together from the many high-resolution images captured during the scanning process.
Credit: J. Stoughton/NIST

The Work

Robert Thompson looking through microscope
Before the scanning process began, I examine the "stretcher bullet," looking for any microscopic marks that could be used to guide the creation of the detailed topographical scans.
Credit: C. Suplee/NIST

Prior to the artifacts ever coming to NIST, our team carried out dry-run preparations for many weeks so that we would be well prepared for scanning the actual specimens. I had previously acquired similar ammunition and a 6.6x52 mm Carcano rifle from the firearm collection of the Bureau of Alcohol, Tobacco, Firearms and Explosives. This was the kind of rifle the assassin used in the shooting. Because I had already closely examined the actual bullets and bullet fragments at NARA, I was able to fire the Carcano rifle at the ATF forensic science laboratory in Beltsville, Maryland, to produce a similar collection of test-fired bullets and fragments. We used these items as training sets that mimicked the actual Kennedy bullets that we would be working with. Employing these samples, we refined our methods and solved instrument challenges well before the actual artifacts arrived. These early efforts would prove invaluable for the work that would ensue.

In addition, the NIST team designed a special apparatus made of a soft material to gently, but firmly, hold a bullet or fragment so no marks would be added to its surfaces during the 3D topography measurements.

Initially we estimated that it would take less than two weeks to scan the forensically relevant surface areas of the assassination bullets and test-fired bullets. We based this estimate on the existing photographs of the bullets and on visual examination of the bullets. However, when the items arrived and we viewed them using a 3D surface-topography microscope, we could see that the fragments and bullets had twice the surface area we had estimated. As with many plans using cutting-edge technology, the first timeline had to be tossed, and the “few days” expanded into several months. Compounding the challenge, advances in 3D topography technology were made during this time, allowing for an even more realistic virtual capture of the artifacts. So, the NIST and NARA teams decided to carry out yet another series of scans.

Thomas Brian Renegar looks at one of the Kennedy bullets, which has been put in a clamp on a platform below a microscope
Physical scientist Thomas Brian Renegar examines the positioning of the bullet before the scanning run begins. Twenty-two such scanning runs were needed to fully capture all the surface details of the "stretcher bullet" from every angle, resulting in 1,699 individual measurements of the bullet’s surface.
Credit: C. Suplee/NIST
a Kennedy bullet clamped on a platform so that the end of the bullet where the firing pin struck is exposed to the camera
During the scanning process, a bright light evenly illuminates the bullet while the microscope captures a series of images. In the end, the individual images were stitched together to create a seamless digital 3D model.
Credit: J. Stoughton/NIST

Why NIST?

The field of forensic science has recently undergone tremendous technological advances. In the field of firearm identification, which determines which gun may have fired a particular bullet, 3D surface-topography microscopes represent the next-generation way to measure the “ballistic signature” of fired bullets and cartridge cases. These measurements are subjected to powerful mathematical algorithms to numerically quantify the similarity between the marks on a crime-scene bullet imparted by the rifling of the gun barrel compared with the barrel-rifling marks on a bullet subsequently test-fired from the gun suspected to have been used in the crime.

Many forensic experts recognize the NIST Forensic Toolmark Analysis Project (FTAP) research team as the world’s leader in the development and validation of these techniques. It was probably because of that reputation that I was contacted by my former crime-laboratory supervisor to assist NARA in preserving the JFK assassination bullets.

Through the expert work of NIST’s FTAP team, NARA now possesses virtual 3D “clones” of the actual ballistic artifacts, which it has shared with the public and interested researchers without the risk of damaging or losing the originals.

Through NIST’s work on these bullets, we have gained knowledge and developed methods for performing 3D surface measurements on some of the most technically challenging ballistic-evidence surfaces encountered in forensic casework. We’ve already started sharing that knowledge and those new methods with the forensic science community.

As with any undertaking of this magnitude, several NIST scientists from across NIST's laboratories worked together to make this project successful: namely, Brian Renegar, Alan Zheng, Hans Soons, Mike Stocker and Rick Silver. I was constantly impressed by their expertise, ingenuity, care and perseverance in what was a historic undertaking. I am proud to have taken part in it with them.

a severely deformed Kennedy bullet illuminated on a platform beneath the camera
In addition to the "stretcher bullet," detailed scans and models were also made of five other artifacts, including two fragments from the bullet that fatally wounded President Kennedy. In this image, one of those fragments is illuminated beneath the microscope’s lens as it is scanned. Due to its complex geometry, more than 30 scans were required to image its entire surface.
Credit: T.B. Renegar/NIST

If you'd like to learn more about the work my colleagues and I did, and also get some historical context for this unique project, check out the article "Kennedy Assassination Bullets Preserved in Digital Form" and the video below.

Preserving the JFK Assassination Bullets
Preserving the JFK Assassination Bullets
President John F. Kennedy’s life and death are active areas of historical research and the focus of continuing public interest. The National Archives gets numerous requests for access to these artifacts every year, but repeatedly removing them from temperature and humidity control would damage them over time. Learn more about how NIST scientists helped solve this dilemma by using advanced imaging techniques to create digital replicas that are true down to the microscopic details.

About the author

Robert M. Thompson

Robert M. Thompson is a senior forensic science research manager and has been with the Special Programs Office-Forensic Sciences at the National Institute for Standards and Technology (NIST) for 12 years. Mr. Thompson has a master of forensic science degree from The George Washington University and a BS in forensic science from the California State University in Sacramento.

Prior to joining NIST, Mr. Thompson worked as a forensic examiner with the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF), the Washoe County Sheriff’s Department, the Oregon State Police, and the GeneLex Corporation. He is a court-accepted expert in several disciplines and has testified as an expert witness in numerous federal and state courts. He is a member of and presents in regional, national, and international forensic science societies. He has numerous publications in international forensic science journals.

Related posts

Comments

Thank you for your detailed explanation of the examination, scanning and publishing of the JFK bullets and fragments. I anticipate this method of preserving the images will be used in other disciplines, such as forensic odontology.

Dr. Tonn,
Thanks for your kind words. Actually, your idea regarding 3D capture of forensic odontology is already being researched and validated. 3D measurement documentation is also being used in crime scenes, shoe & tire impressions, anthropology, and pathology with more specialties on the horizon.

The 264 bullet is Not The one that is made to fire in that rifle. It uses a 268. A really hard round to find nowadays. If you use the smaller round you don't have any accuracy.

We are doing research on the bullet fragments from the JFK assassination. We need to have access to the specific microscopic, detailed images of those fragments. Please advise as to availability and accessibility. Thank you.

Two things here:
(1) Is Oscar (above) saying that the bullet diameter of the military 6.5 mm Carcano is .268"while we know that the more typical 6.5 mm sporting rounds of today use a .264" diameter bullet? Even if so, I can't see what that has to do with this treatise.
(2) Robert, as this would indicate, do you believe that Oswald was indeed the lone killer of JFK?

this is a great website to show respect to jfk.

Add new comment

CAPTCHA
Image CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Please be respectful when posting comments. We will post all comments without editing as long as they are appropriate for a public, family friendly website, are on topic and do not contain profanity, personal attacks, misleading or false information/accusations or promote specific commercial products, services or organizations. Comments that violate our comment policy or include links to non-government organizations/web pages will not be posted.