Analysis of Contact Interfaces for Single GaN Nanowire Devices

Published

November 1, 2013

Author(s)

Andrew M. Herrero, Paul T. Blanchard, Kristine A. Bertness

Abstract

Single GaN nanowire (NW) devices fabricated on SiO2 can exhibit a strong degradation after annealing due to the occurrence of void formation at the contact/SiO2 interface. This void formation can cause cracking and delamination of the metal film, which can increase the resistance or lead to a complete failure of the NW device. In order to address issues associated with void formation, a technique was developed that removes Ni/Au contact metal films from the substrates to allow for the examination and characterization of the contact/substrate and contact/NW interfaces of single GaN NW devices. This procedure determines the degree of adhesion of the contact films to the substrate and NWs and allows for the characterization of the morphology and composition of the contact interface with the substrate and nanowires. This technique is also useful for assessing the amount of residual contamination that remains from the NW suspension and from photolithographic processes on the NW-SiO2 surface prior to metal deposition. The detailed steps of this procedure are presented for the removal of annealed Ni/Au contacts to Mg-doped GaN NWs on a SiO2 substrate.

Citation

The Journal of Visualized Experiments

Pub Type

Journals

Keywords

semiconductor device, GaN, nanowires, contacts

Citation

Herrero, A. , Blanchard, P. and Bertness, K. (2013), Analysis of Contact Interfaces for Single GaN Nanowire Devices, The Journal of Visualized Experiments (Accessed December 21, 2024)