Interoperability Testbed for Smart Sensors in Smart Grids

Published

July 9, 2018

Author(s)

Yuyin Song, Gerald J. FitzPatrick, Kang B. Lee, Avi M. Gopstein, Paul A. Boynton

Abstract

Interoperability testing provides a means for achieving and assuring smart sensor data interoperability. Interoperability testbeds can provide the technical foundations for standards development for smart sensors in smart grids, including standards for interoperability test methods and tools. This paper introduces an interoperability testbed for smart sensors, which has been built at the National Institute of Standards and Technology (NIST). This testbed consists of four layers: power grids, sources, or simulators; smart sensors; networks; and smart sensor testers (SSTs). This testbed can be used to test the interoperability of standardized communication protocol-based smart sensors. We use International Electrotechnical Commission (IEC) 61850-9-2 lite edition (LE) merging unit (MU)-based smart sensors as an example for interoperability testing. An interoperability testing system for MU-based smart sensors was set up and testing of two commercial MU-based smart sensors was conducted. The test results not only show the interoperability of two commercial MU-based smart sensors, but also demonstrate that the interoperability test method and test system are effective.

Conference Dates

February 19-22, 2018

Conference Location

Washington, DC

Conference Title

IEEE ISGT 2018 Conference

Pub Type

Conferences

Download Paper

DOI Link

Keywords

Device under Test (DUT), Interoperability Analyzer, Interoperability Test, Merging Unit (MU), Network Sniffer, Smart Grid (SG), Smart Sensor, Smart Sensor Tester (SST), Testbed

Citation

Song, Y. , FitzPatrick, G. , Lee, K. , Gopstein, A. and Boynton, P. (2018), Interoperability Testbed for Smart Sensors in Smart Grids, IEEE ISGT 2018 Conference, Washington, DC, [online], https://doi.org/10.1109/ISGT.2018.8403332 (Accessed December 22, 2024)