An Intra-Volume Ad Hoc Array Concept for Improved Public-Safety Communications

Published

May 19, 2013

Author(s)

Christopher L. Holloway

Abstract

Here we report on the testing and measurements of an intra-volume ad hoc array concept suitable for public-safety communications in buildings. The overall concept is to use randomly located (or arbitrarily placed) wireless devices in a coordinated manner in order to increase the radio-frequency signal level at otherwise unreachable locations. A typical ad hoc network is limited to a coverage area achieved by the useable coverage of single nodes. We seek to extend the radio-frequency coverage by using two or more nodes as elements of an ad hoc phased array. The measurements results presented here, collected in real-world environments, along with simulations, based on real-world data, demonstrate that the ad hoc array technique can provide useful gain, up to 10 dB with only four elements. Both the measurements also indicate a typical gain of 2 dB to 6 dB using only two elements. Analysis of the phase indicates a phase alignment of ± 45° achieves within 1 dB of the maximum.

Citation

IEEE Transactions on Wireless Communications

Pub Type

Journals

Download Paper

Local Download

Keywords

ad hoc phased array, wireless arrays, emergency responders, multipath, radio communications, radio propagation experiments, weak-signal detection, public-safety communications.

Citation

Holloway, C. (2013), An Intra-Volume Ad Hoc Array Concept for Improved Public-Safety Communications, IEEE Transactions on Wireless Communications, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=905779 (Accessed July 18, 2024)