Zhang, C.
, Grosshandler, W.
, Sauca, A.
and Choe, L.
(2019),
Design of the ASTM E119 fire environment in a large compartment, Fire Technology, [online], https://doi.org/10.1007/s10694-019-00924-7
(Accessed December 26, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Design of the ASTM E119 fire environment in a large compartment
Published
Author(s)
, , ,
Abstract
This paper presents a basis for designing the ASTM E119 fire environment in a large compartment of about 10 m wide, 7 m deep and 3.8 m high constructed in the National Fire Research Laboratory of the National Institute of Standards and Technology. Using the designed fire parameters, a full-scale experiment was carried out on December 20, 2018. The measured average gas temperature curve matched well with the E119 fire curve. The maximum error towards the end of the test was about 70 oC (7%). The study indicates that by proper design and control, the time-temperature curve for the standard fire test may be attained in a real compartment.Citation
Fire Technology
Pub Type
Journals
Download Paper
Keywords
Full-scale experiment, ASTM E119 fire, Large compartment, Test fire, Design approach
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created November 1, 2019, Updated January 7, 2020