Linteris, G.
, Rumminger, M.
and Babushok, V.
(2000),
Premixed Carbon Monoxide-Nitrous Oxide-Hydrogen Flames: Measured and Calculated Burning Velocities With and Without Fe(CO)5, Combustion and Flame, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=914395
(Accessed January 3, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Premixed Carbon Monoxide-Nitrous Oxide-Hydrogen Flames: Measured and Calculated Burning Velocities With and Without Fe(CO)5
Published
Author(s)
, M D. Rumminger,
Abstract
The burning velocity of premixed carbon monoxide-nitrous oxide flames (background water levels of 5 to 15 ppm) has been determined experimentally for a range of fuel-oxidizer equivalence ratio phi from 0.6 to 3.2, with added nitrogen up to a mole fraction of XN2 = 0.25, and with hydrogen added up to XH2 = 0.005. Numerical modeling of the flames based on a recently developed kinetic mechanism predicts the burning velocity reasonably well, and indicates that the direct reaction of CO with N20 is the most important reaction for CO and N20 consumption for values of XH2Citation
Combustion and Flame
Volume
120
Issue
No. 1/2
Pub Type
Journals
Download Paper
Keywords
carbon monoxide, chemical inhibition, flame chemistry, iron pentacarbonyl, nitrous oxides, promoters, propellants
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created January 1, 2000, Updated February 19, 2017