Leibrandt, D.
, Bergquist, J.
and Rosenband, T.
(2013),
Cavity-stabilized laser with acceleration sensitivity below 10<sup>-12</sup>/g<sup>-1</sup>, Physical Review A, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=913015
(Accessed December 11, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Cavity-stabilized laser with acceleration sensitivity below 10-12/g-1
Published
Author(s)
, ,
Abstract
We characterize the frequency-sensitivity of a cavity-stabilized laser to inertial forces and temperature fluctuations, and perform real-time feed-forward to correct for these sources of noise. We measure the sensitivity of the cavity to linear accelerations, rotational accelerations, and rotational velocities by rotating it about three axes with accelerometers and gyroscopes positioned around the cavity. The worst-direction linear acceleration sensitivity of the cavity is 2(1) × 10-11/g measured over 0--50~Hz, which is reduced by 34~dB to below 10-12/g for low frequency accelerations by real-time feed-forward corrections of all of the aforementioned inertial forces. A similar idea is demonstrated in which laser frequency drift due to temperature fluctuations is reduced by 36~dB via real-time feed-forward using a temperature sensor located on the outer wall of the cavity vacuum chamber.Citation
Physical Review A
Volume
87
Pub Type
Journals
Download Paper
Keywords
Metrological applications, optical frequency synthesizers for precision spectroscopy, Resonators, cavities, amplifiers, arrays, and ring, robots, Servo and control equipment, Vibrations and mechanical waves
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created February 21, 2013, Updated February 19, 2017