U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

PUBLICATIONS

A Computational and Experimental Investigation of Thermal Desorption and Vapor Sampling in an Explosive Trace Detector

Published

Author(s)

Matthew E. Staymates, Wayne Smith, Eric S. Windsor

Abstract

Swipe-based explosive trace detectors rely on thermal desorption to vaporize explosive particles collected on a swipe. The vaporized material is carried by air flows from the desorption unit to the inlet of the chemical analyzer, typically an ion mobility spectrometer. We have observed that the amount of explosives detected from a swipe varies with the location at which the explosives are collected on the swipe. There are two issues which may contribute to this effect: inhomogeneous or insufficient heating of the swipe during desorption and low velocity air flows that poorly transport desorbed vapor during the instruments analysis time. To better characterized this effect, we have simulated the air movements within a generic desorption unit using commercially available computational fluid dynamics software. Simulations are three dimensional, symmetric and solved under steady, laminar flow conditions. The calculated velocity field correlates directly with experimental detector response with the high explosive RDX. Results suggest that the limiting factor in this generic thermal desorption unit is not heating the swipe to a sufficient temperature, but the flow-field around the swipe and flow rate into the detector. Buoyancy effects due to heating dominate the flow-field and produce a vertical bulk fluid motion within the domain which opposes much of the flow drawn into the analyzer.
Citation
Journal of Fluids Engineering-Transactions of the Asme
Pub Type
Journals

Keywords

thermal desorption, trace detection, inkjet printing, explosives
Analytical chemistry, Sensors, Flow metrology and rheology and Thermodynamics

Citation

Staymates, M. , Smith, W. and Windsor, E. (2011), A Computational and Experimental Investigation of Thermal Desorption and Vapor Sampling in an Explosive Trace Detector, Journal of Fluids Engineering-Transactions of the Asme (Accessed December 12, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created June 30, 2011, Updated February 19, 2017