Amon, F.
and Lock, A.
(2009),
Evaluation of Image Quality of Thermal Imagers used by the Fire Service, Technical Note (NIST TN), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=903767
(Accessed December 26, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Evaluation of Image Quality of Thermal Imagers used by the Fire Service
Published
Author(s)
,
Abstract
This document reports on the test results of an evaluation of the image quality of thermal imaging cameras used by the fire service. The test methods used were consistent with the image quality test methods included in Draft National Fire Protection Association (NFPA) 1801 Standard on Thermal Imagers for the Fire Service. These tests measured the nonuniformity, spatial resolution, effective temperature range, and thermal sensitivity of fire service thermal imagers. Images used for these tests were collected using a high resolution visible camera focused on the thermal imager s display while the thermal imager viewed a variety of thermal targets. The laboratory test results were evaluated in terms of a multivariate model of human perception, which was based on tests conducted on firefighters viewing thermal images of representative scenes in which a fire hazard may be present.Citation
Technical Note (NIST TN) - 1646
Report Number
1646
NIST Pub Series
Pub Type
NIST Pubs
Download Paper
Keywords
evaluation, image quality, thermal imager, fire service, nonuniformity, spatial resolution, effective temperature range, thermal sensitivity
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created February 27, 2009, Updated February 19, 2017