Bowers Jr., W.
and Olson, D.
(2010),
A Capacitive Probe for Measuring the Clearance Between the Piston and the Cylinder of a Gas Piston Gauge, Review of Scientific Instruments, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=903966
(Accessed December 4, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
A Capacitive Probe for Measuring the Clearance Between the Piston and the Cylinder of a Gas Piston Gauge
Published
Author(s)
,
Abstract
We propose a method of determining the radial clearance between the piston and cylinder of a gas piston gauge using a capacitive technique. This method allows a determination of the effective area of a piston gauge pressure standard, independent of calibration against another piston gauge or manometer, as long as the piston diameter is dimensionally measured. It also allows an independent determination of piston gauge distortion due to pressure. We have used this technique to measure the clearance and the distortion of six gas piston gauges of the Ruska 2465 type operating in gauge mode. Measurements were made on two gauges each in the low, middle, and high ranges. In this paper we describe the capacitance technique and the results of the measurements on the six piston gauges.Citation
Review of Scientific Instruments
Volume
81
Issue
3
Pub Type
Journals
Download Paper
Keywords
capacitance, effective area, gas piston gauge, piston gauge distortion, pressure standard
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created March 9, 2010, Updated October 12, 2021