Effect of tensile strain on grain connectivity and flux pinning in Bi2Sr2Ca2Cu3Ox tapes

Published

January 17, 2006

Author(s)

Daniel C. van der Laan, John (Jack) W. Ekin, Hans J. van Eck, M Dhalle, Bennie ten Haken, Michael W. Davidson, Justin Schwartz

Abstract

The grain-to-grain connectivity in Bi₂Sr₂Ca₂Cu₃O_x tapes is still poorly understood, even though they have been commercially available in long lengths for several years. This letter explains the effects of tensile strain on the grain-to-grain connectivity in Bi₂Sr₂Ca₂Cu₃O_x tapes. The different length scales at which damage to the grain structure occurs are studied with magneto-optical imaging, scanning-electron microscopy, and transport current. These data show that the initial degradation in critical current when strain exceeds the irreversible strain limit is caused by microcracks (approximately equal}100-500 nm in width) that form mainly at high-angle grain boundaries. Filament- wide cracks (approximately equal}5-10 υm in width) form at locations of lower grain density in the filaments at strains far exceeding the irreversible strain limit. However, in contrast to previous reports, a careful analysis of the pinning force as function of tensile strain, taking into account current sharing with the normal matrix by using the offset criterion, shows that intragranular flux pinning is not affected by strain in any significant way.

Citation

Applied Physics Letters

Volume

88

Issue

022511

Pub Type

Journals

Download Paper

Local Download

Keywords

Bi₂Sr₂Ca₂Cu₃O_x tapes, critical current, flux pinning, grain connectivity, High-temperature superconductors, strain

Citation

van der Laan, D. , Ekin, J. , van Eck, H. , Dhalle, M. , ten Haken, B. , Davidson, M. and Schwartz, J. (2006), Effect of tensile strain on grain connectivity and flux pinning in Bi₂Sr₂Ca₂Cu₃O_x tapes, Applied Physics Letters, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=32118 (Accessed December 26, 2024)