Remley, K.
, Hale, P.
and Williams, D.
(2007),
Absolute Magnitude and Phase Calibrations, Taylor and Francis, Boca Raton, FL
(Accessed March 14, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Absolute Magnitude and Phase Calibrations
Published
Author(s)
, ,
Abstract
In VNA measurements, the magnitude and phase of a transmitted or reflected wave are measured relative to that of the incident wave. VNA measurements are made a single frequency at a time and each frequency component is acquired relative to the internally generated excitation signal at that frequency. As a result, traditional VNA measurements cannot gie us information on the phase relationships between frequency components since each measurements of a collection of known, linear artifacts, as discussed in Section 4.2. Measurements such as these, based on single-frequency acquisition and realtive calirbations, are useful for finding the linear response of systems such as electronically passive networks.Citation
RF and Microwave Circuits, Measurements, and Modeling
Publisher Info
Taylor and Francis, Boca Raton, FL
Pub Type
Books
Keywords
Absolute Calibration, Calibration Waveform, High-Speed Digital Signal Measurement, Instrument Impulse Response, Large-Signal Network Analyzer, Oscilloscope, Phase Calibration, Signal-Measurement Instrumentation, Vector Signal Analyzer, Wireless Communication System Measurement
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created September 30, 2007, Updated October 12, 2021