Chou, Y.
and Evans, C.
(1997),
Tool Wear Mechanism in Continuous Cutting of Hardened Tool Steels, Wear
(Accessed April 26, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Tool Wear Mechanism in Continuous Cutting of Hardened Tool Steels
Published
Author(s)
Y K. Chou,
Abstract
Precision hard turning provides an alternative to grinding in some finishing applications. Rapid tool wear, however, remains an impediment to the process being economically viable. This experimental study investigates microstructural aspects of cubic boron nitride (CBN) tool wear in finish hard turning. Results indicate that; 1) carbide sizes of the workpiece have significant effects on tool wear; 2) flank wear rate can be correlated with mean carbide diameter of the workpiece; 3) wear resistance monotonically increases with decreasing CBN grain size; and 4) in finish turning with low CBN content tools, the governing wear mechanism is fine scale attrition by microfracture and fatigue. A powder metallurgy M50 bar hard turned using an ultrafine CBN grain tool shows flank wear less than 45 ?m VBmax after 6.2 km cutting distance; this wear rate equals 3.1 microm/km, over an order of magnitude lower than when machining conventional M50 under identical conditions. Surface finish is better than 80 nm Ra.Citation
Wear
Volume
212
Pub Type
Journals
Keywords
CBN tools, Hard turning, Manufacturing Processes, Tool wear, Tool wear
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created November 3, 1997, Updated October 12, 2021