Ricker, R.
(2008),
On Using Laboratory Measurements to Predict Corrosion Service Lives for Engineering Applications, Journal of ASTM International
(Accessed November 8, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
On Using Laboratory Measurements to Predict Corrosion Service Lives for Engineering Applications
Published
Author(s)
Abstract
Issues concerning making corrosion service life predictions on the basis of laboratory measurements are examined. Models for corrosion service life prediction will reduce corrosion failures and operation costs by enabling better design, alloy selection, full life-cycle cost analysis, and operation. An expected value approach for estimating corrosion damage accumulation and failure rates is proposed. Examination of this approach indicates that understanding the uncertainties due to the variability of the exposure environments will be a critical element of these predictions. It is concluded that, with properly developed, evaluated, and standardized corrosion defect sample designs and propagation rate measurement techniques, it will be possible to develop corrosion defect tolerant design approaches analogous to those used successfully to prevent fatigue failures.Citation
Journal of ASTM International
Pub Type
Journals
Keywords
corrosion, crevice corrosion, defect tolerance, failure prevention, inspection, service life prediction
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created July 1, 2008, Updated February 19, 2017