An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Strength of Silicon, Sapphire in the Subthreshold Flaw and Glass Region
Published
Author(s)
Yeon-Gil G. Jung, Antonia Pajares, R Banerjee, Brian R. Lawn
Abstract
Strength properties are determined for monocrystalline silicon and sapphire and for soda-lime glass plates containing subthreshold flaws, i.e. flaws without detectable microcracks. Nanoindentations covering a wide range of loads are used to introduce flaws of predetermined sizes into highly polished or etched surfaces, to enable systematic study of the transition from the postthreshold to subthreshold regions. Strengths of the indented plates are measured using a simple bilayer test configuration in which the plates are bonded indentations downward onto a polycarbonate support base and loaded centrally at their top surfaces to failure. Failure occurs from flaw sites over the entire range of diminishing loads, up to a strength cutoff at > 2 GPa associated with natural surface flaws. In none of the materials do the postthreshold strength/indentation-load data extrapolate unconditionally into the subthreshold region. However, whereas the glass data show an abrupt increase in strength at the threshold, the silicon and sapphire data show only a slight discontinuity in slope. A simple model for subthreshold flaws, based on the critical conditions to initiate radial cracking from embryonic shear faults within the contact damage sites, accounts for the main size trends in the data. The disparities between the glass and crystalline responses are attributed to differences in the precursor shear fault geometries. The general applicability of the scaling concepts to a broad range of alternative flaw types, e.g. associated with microstructural defects, is discussed.
Jung, Y.
, Pajares, A.
, Banerjee, R.
and Lawn, B.
(2004),
Strength of Silicon, Sapphire in the Subthreshold Flaw and Glass Region, Acta Materialia
(Accessed August 31, 2024)