Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Strain Measurements in A Thermally-Cycled Flip-Chip PBGA Solderball

Published

Author(s)

Elizabeth S. Drexler

Abstract

The mismatch between the coefficients of thermal expansion of the silicon chip and the organic substrate has been mitigated through the practice of using underfill in flip-chip packages. Yet solder fatigue and package failures still occur. This is particularly true for flip-chips on organic substrates that are thermally cycled between low (-55 C) and high temperatures (125 C). In this study we used electron-beam moire to measure displacements and calculate strains in a solderball contained in a flip-chip-on-board package. A crossed-line grating with a pitch of 450 nm was used to allow detailed measurements of the displacements from the Ņ-field images. Elastic displacements were observed and measured, and the out-of-plane displacements were more significant than the shear or in-plane displacements. Larger out-of-plane displacements were measured near the center of the Si chip than at the edge of the chip.
Citation
Journal of the Materials Research Society
Volume
563

Keywords

electron-beam moire, flip chip, flip-chip-on-board, moire, solderball, strain, thermal cycling, underfill

Citation

Drexler, E. (1999), Strain Measurements in A Thermally-Cycled Flip-Chip PBGA Solderball, Journal of the Materials Research Society (Accessed October 6, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created March 1, 1999, Updated February 17, 2017