Lowney, J.
, Vladar, A.
and Postek, M.
(1996),
High-Accuracy Critical-Dimension Metrology Using a Scanning Electron Microscope, Proceedings of SPIE, Metrology, Inspection, and Process Control for Microlithography X, Susan K. Jones, Editor, Santa Clara, CA, USA
(Accessed December 15, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
High-Accuracy Critical-Dimension Metrology Using a Scanning Electron Microscope
Published
Author(s)
, ,
Abstract
Two Monte Carlo computer codes have been written to simulate the transmitted-, backscattered-, and secondary-electron signals from targets in a scanning electron microscope. The first discussed, MONSEL-II, is applied to semi-infinite lines produced lithographically on multi-layer substrates. The second discussed, MONSEL-III, is an extension to fully three-dimensional targets. Results are given for a 1 micrometer step etched in a silicon substrate and compared with experimental data. The comparisons show that it is possible to obtain edge locations to an uncertainty of less than 10 nm. Simulations are also given for photoresist lines on a silicon substrate coated with a layer of photoresist. Techniques are developed for simulating signals for finite beam diameter from those for zero beam diameter, and for extracting signals approximating zero beam diameter from those with finite beam diameter.Proceedings Title
Proceedings of SPIE, Metrology, Inspection, and Process Control for Microlithography X, Susan K. Jones, Editor
Volume
2725
Conference Location
Santa Clara, CA, USA
Pub Type
Conferences
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created April 30, 1996, Updated October 12, 2021