Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

A passively mode-locked fiber laser at 1.54 υm with a fundamental repetition frequency reaching 2 GHz

Published

Author(s)

John Mcferran, Ljerka Nenadovic, William C. Swann, John B. Schlager, Nathan R. Newbury

Abstract

We demonstrate a fundamentally mode-locked fiber laser with a repetition frequency in excess of 2 GHz at a central wavelength of 1.535 υm. Co-doped ytterbium-erbium fiber provides the gain medium for the laser, affording high gain per unit length, while a semiconductor saturable absorber mirror (SAM) provides the pulse shaping mechanism in a standing wave cavity. Results are shown confirming cw mode-locking for 1 GHz and 2 GHz repetition frequency systems. The response of the frequency comb output to pump power variations is shown to follow a single pole response. The timing jitter of a 540 MHz repetion-rate laser has been suppressed to below 100 fs through phase-lead compensated feedback to the pump power. Alternatively, a single comb line of a 850 MHz repetition-rate laser has been phase-locked to a narrow linewidth cw laser with an in-loop phase jitter of 0.06 rad2. The laser design is compatible with low-noise oscillator applications.
Citation
Optics Express
Volume
15
Issue
20

Keywords

fiber lasers, metrological instrumentation., mode-locked lasers

Citation

Mcferran, J. , Nenadovic, L. , Swann, W. , Schlager, J. and Newbury, N. (2007), A passively mode-locked fiber laser at 1.54 υm with a fundamental repetition frequency reaching 2 GHz, Optics Express, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=32743 (Accessed July 1, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created September 25, 2007, Updated October 12, 2021