Time and Frequency Transfer Using a WAAS Satellite with L1 and L5 Code and Carrier

Published

May 19, 2008

Author(s)

Marc A. Weiss, P Fenton, Edward Powers, A. Kropp, Raymond Pelletier

Abstract

Two Wide Area Augmentation System (WAAS) satellites are now transmitting the standard L1 and L5 carriers and codes of the Global Positioning System (GPS). Since these are geostationary satellites, it is possible to aim a parabolic dish at one and obtain high-gain, low-multipath interference signals without interruption. Such high-gain dishes, along with appropriate GPS receivers, were set up at three timing laboratories in North America: the National Institute of Standards and Technology in Boulder, Colorado, U.S.A., the United States Naval Observatory (USNO) in Washington D.C., U.S.A., and the National Research Council (NRC), Ottawa, Ontario, Canada. We report the results of this experiment over a 104 d period: January 1 to April 14, 2008, though with several significant outages, and other clock/data problems.

Proceedings Title

Proc. Freq. Cont. Symp

Conference Dates

May 19-22, 2008

Conference Location

Honolulu, HI

Pub Type

Conferences

Download Paper

Local Download

Keywords

Wide Area Augmentation System, GPS L1, GPS L5, time transfer stability, carrier-phase time transfer

Citation

Weiss, M. , Fenton, P. , Powers, E. , Kropp, A. and Pelletier, R. (2008), Time and Frequency Transfer Using a WAAS Satellite with L1 and L5 Code and Carrier, Proc. Freq. Cont. Symp, Honolulu, HI, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=842483 (Accessed July 27, 2024)