The Strain Path Dependence of Plastic Deformation Response of AA5754: Experiment and Modeling

Published

January 6, 2014

Author(s)

Minh-Son Pham, Lin Hu, Mark A. Iadicola, Adam A. Creuziger, Anthony D. Rollett

Abstract

This work presents modeling of experiments on a balanced biaxial (BB) pre-strained AA5754 alloy, subsequently reloaded uniaxially along the rolling direction and transverse direction. The material exhibits a complex plastic deformation response during the change in strain path due to 1) crystallographic texture, 2) aging (interactions between dislocations and Mg atoms) and 3) recovery (annihilation and re-arrangement of dislocations). With a BB pre-strain of about 5 %, the aging process is dominant, and the yield strength for uniaxially deformed samples is observed to be higher than the flow stress during BB straining. The strain hardening rate after changing path is, however, lower than that for pre-straining. Higher degrees of pre-straining make the dynamic recovery more active. The dynamic recovery at higher strain levels compensates for the aging effect, and results in: 1) a reduction of the yield strength, and 2) an increase in the hardening rate of re-strained specimens along other directions. The yield strength of deformed samples is further reduced if these samples are left at room temperature to let static recovery occur. The synergistic influences of texture condition, aging and recovery processes on the material response make the modeling of strain path dependence of mechanical behavior of AA5754 challenging. In this study, the influence of crystallographic texture is taken into account by incorporating the latent hardening into a visco-plastic self-consistent model. Different strengths of dislocation glide interaction models in 24 slip systems are used to represent the latent hardening. Moreover, the aging and recovery effects are also included into the latent hardening model by considering strong interactions between dislocations and dissolved atom Mg and the microstructural evolution. These microstructural considerations provide a powerful capability to successfully describe the strain path dependence of plastic deformation behavior of AA5754

Proceedings Title

NUMISHEET2014

Conference Dates

January 6-10, 2014

Conference Location

Melbourne

Pub Type

Conferences

Download Paper

DOI Link

Keywords

Latent hardening, Strain path dependence, Aging, Recovery, AA5754

Citation

Pham, M. , Hu, L. , Iadicola, M. , Creuziger, A. and Rollett, A. (2014), The Strain Path Dependence of Plastic Deformation Response of AA5754: Experiment and Modeling, NUMISHEET2014, Melbourne, -1, [online], https://doi.org/10.1063/1.4850021 (Accessed December 29, 2024)