Houtz, D.
, Walker, D.
and Gu, D.
(2015),
SIMULATIONS TO CHARACTERIZE A PASSIVE MICROWAVE BLACKBODY DESIGN, 2015 IEEE International Geoscience and Remote Sensing Symposium, Milan, -1
(Accessed November 21, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
SIMULATIONS TO CHARACTERIZE A PASSIVE MICROWAVE BLACKBODY DESIGN
Published
Author(s)
, ,
Abstract
This paper discusses the design of a microwave blackbody to be used as a primary laboratory standard for passive remote sensing applications. The design is required to have excellent performance over the frequencies ranging from 10 GHz to 220 GHz and will be adjustable in temperature. We discuss the challenges involved in designing this type of calibration source and address how improvements can be made over the designs typically flown on airborne and space-borne instruments. A simplified electromagnetic model for absorber layer optimization is introduced as the precursor to a finite element full wave solution for the calculation of emissivity. A temperature simulation predicts the physical temperature of the blackbody and chamber. The simulated data are used as inputs to a rigorous calculation of the microwave brightness temperature radiated by the blackbody source. This calculation provides an estimate of the offset between measured physical temperature and radiometrically measured brightness temperature.Proceedings Title
2015 IEEE International Geoscience and Remote Sensing Symposium
Conference Dates
July 26-31, 2015
Conference Location
Milan
Pub Type
Conferences
Keywords
remote sensing, blackbody, passive microwave, calibration, design, simulation
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created July 29, 2015, Updated February 19, 2017