U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications by: Lyle E. Levine (Fed)

Search Title, Abstract, Conference, Citation, Keyword or Author
Displaying 26 - 50 of 269

Solid-State Transformation of an Additive Manufactured Inconel 625 Alloy at 700 degC

September 23, 2021
Author(s)
Fan Zhang, Jan Ilavsky, Greta Lindwall, Mark R. Stoudt, Lyle E. Levine, Andrew J. Allen
Inconel 625, a nickel-based superalloy, has drawn much attention in the emerging field of additive manufacturing (AM) because of its excellent weldability and resistance to hot cracking. The extreme processing condition of AM often introduces enormous

The creep and fracture properties of additively manufactured inconel 625

January 25, 2021
Author(s)
Kwang-Tae Son, Thien Q. Phan, Lyle E. Levine, Kyu-Sik Kim, Kee-Ahn Lee, Magnus Ahlfors, Michael E. Kassner
High temperature creep tests of additively manufactured (AM) nickel-based superalloy Inconel 625 (IN 625) and wrought 625 were conducted at 650 ˚C and 800 ˚C over the stress range of 65 MPa to 658 MPa. Thermal treatments were conducted prior to creep

Location-specific Microstructure Characterization Within IN625 Additive Manufacturing Benchmark Test Artifacts

March 3, 2020
Author(s)
Mark R. Stoudt, Maureen E. Williams, Lyle E. Levine, Adam Abel Creuziger, Sandra A. Young, Jarred C. Heigel, Brandon Lane, Thien Q. Phan
Additive manufacturing (AM) of metals creates segregated microstructures with significant differences from those of traditional wrought alloys. Understanding how the local build conditions generate specific microstructures is essential for developing post

Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference

February 13, 2020
Author(s)
Lyle E. Levine, Brandon M. Lane, Jarred C. Heigel, Kalman D. Migler, Mark R. Stoudt, Thien Q. Phan, Richard E. Ricker, Maria Strantza, Michael R. Hill, Fan Zhang, Jonathan E. Seppala, Edward J. Garboczi, Erich D. Bain, Daniel Cole, Andrew J. Allen, Jason C. Fox, Carelyn E. Campbell
The Additive Manufacturing Benchmark Test Series (AM-Bench) was established to provide rigorous measurement test data for validating additive manufacturing (AM) simulations for a broad range of AM technologies and material systems. AM-Bench includes

Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates

February 5, 2020
Author(s)
Brandon M. Lane, Jarred C. Heigel, Richard E. Ricker, Ivan Zhirnov, Vladimir Khromchenko, Jordan S. Weaver, Thien Q. Phan, Mark R. Stoudt, Sergey Mekhontsev, Lyle E. Levine
The complex physical nature of the laser powder bed fusion (LPBF) process warrants use of multiphysics computational simulations to predict or design optimal operating parameters or resultant part qualities such as microstructure or defect concentration

Topographic Measurement of Individual Laser Tracks in Alloy 625 Bare Plates

October 10, 2019
Author(s)
Richard E. Ricker, Jarred C. Heigel, Brandon M. Lane, Ivan Zhirnov, Lyle E. Levine
Additive manufacturing (AM) combines all of the complexities of materials processing and manufacturing into a single process. The digital revolution made this combination possible, but the commercial viability of these technologies for critical parts may

Phase Fraction and Evolution of Additively Manufactured 15-5 Stainless Steel and Inconel 625 AM- Benchmark Artifacts

August 5, 2019
Author(s)
Fan Zhang, Lyle E. Levine, Andrew J. Allen, Sandra A. Young, Maureen E. Williams, Mark R. Stoudt, Kil-Won Moon, Jarred C. Heigel, Jan Ilavsky
A proper understanding of the structure and microstructure of additive manufactured (AM) alloys is essential not only to the prediction and assessment of their material properties, but also to the validation and verification of computer models essential to

Elastic residual strain and stress measurements and corresponding part deflections of 3D AM builds of IN625 AM-Bench artifacts using neutron diffraction, synchrotron X-ray diffraction, and contour method

July 29, 2019
Author(s)
Thien Q. Phan, Maria Strantza, Michael R. Hill, Thomas H. Gnaupel-Herold, Jarred C. Heigel, Christopher D'Elia, DeWald Adrian, Bjorn Clausen, Darren C. Pagan, J. Y. Peter Ko, Donald W. Brown, Lyle E. Levine
One of the primary barriers for acceptance of additive manufacturing (AM) has been the uncertainty in the performance of AM parts due to residual stresses/strains. The rapid heating and cooling rates, along with the thermal history of the laser melting

Evaluation of a thermo-mechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V

April 2, 2019
Author(s)
Rishi Ganeriwala, Maria Strantza, Wayne King, Bjorn Clausen, Thien Q. Phan, Lyle E. Levine, Donald W. Brown, Niel Hodge
The build-up of residual stress in a part during laser powder bed fusion provides a significant limitation to the adoption of this process. These residuals stresses may cause a part to fail during a build or fall outside the specified tolerances after

Simulation of TTT curves for additively manufactured Inconel 625

January 1, 2019
Author(s)
Carelyn E. Campbell, Greta Lindwall, Eric Lass, Fan Zhang, Mark R. Stoudt, Andrew J. Allen, Lyle E. Levine
The ability to use common computational thermodynamic and kinetic tools to study the microstructure evolution in Inconel 625 (IN625) manufactured using the additive manufacturing (AM) technique of laser powder-bed fusion is evaluated. Solidification