Natl Std. Ref. Data Series (NIST NSRDS)

NIST Electron Elastic-Scattering Cross-Section Database Version 5.0 User's Guide

December 20, 2023

Author(s)

Aleksander Jablonski, F Salvat, Cedric J. Powell, Justin Gorham

Simulation of Electron Spectra for Surface Analysis (SESSA)Version 2.2 User's Guide

March 2, 2021

Author(s)

Wolfgang Werner, Werner Smekal, Cedric J. Powell, Justin Gorham

REFLEAK: NIST Leak/Recharge Simulation Model for Refrigerant Blends

May 8, 2020

Author(s)

J S. Brown, Piotr A. Domanski, Riccardo Brignoli, Young J. Yoon

REFLEAK simulates leak and recharge processes for refrigerant zeotropic blends. This Windows- based simulation model provides an easy-to-use package that allows

CYCLE_D: NIST Vapor Compression Cycle Design Program, Version 6.0; User's Guide

November 19, 2018

Author(s)

Piotr A. Domanski, J S. Brown, Eric W. Lemmon

The CYCLE_D package simulates vapor compression refrigeration cycles that use pure refrigerants or blends of refrigerants. The model can simulate a basic

REFLEAK: NIST Leak/Recharge Simulation Model for Refrigerant Blends Version 5.1; User's Guide

November 19, 2018

Author(s)

Piotr A. Domanski, J S. Brown

As alternatives to refrigerants with a high global warming potential, blends of two or more refrigerants are being utilized as working fluids in heat-pump, air

NIST Database for the Simulation of Electron Spectra for Surface Analysis (SESSA), Version 2.1.1

September 18, 2018

Author(s)

Cedric J. Powell

The purpose of the NIST Database for the Simulation of Electron Spectra for Surface Analysis (SESSA) is to facilitate quantitative interpretation of Auger

NIST Database for the Simulation of Electron Spectra for Surface Analysis (SESSA), SRD 100, Version 2.1

December 21, 2017

Author(s)

Wolfgang Werner, Werner Smekal, Cedric J. Powell

The objective of the NIST database for Simulation of Electron Spectra for Surface Analysis (SESSA) is to facilitate quantitative interpretation of Auger

CYCLE_D: NIST Vapor Compression Cycle Design Program, Version 5.1.1; Users Guide

March 9, 2017

Author(s)

Piotr A. Domanski, J S. Brown, Eric W. Lemmon

The CYCLE_D package simulates vapor compression refrigeration cycles that use pure refrigerants or blends of refrigerants. The model can simulate a basic

NIST Special Database 6 - Structured Forms Database II User's Guide

March 6, 2017

Author(s)

Darrin L. Dimmick, Michael D. Garris, Patricia A. Flanagan

NIST Special Database 2 - Structured Forms Database Users' Guide

March 6, 2017

Author(s)

Darrin L. Dimmick, Michael Garris, Charles L. Wilson, Patricia A. Flanagan

REFLEAK: NIST Leak/Recharge Simulation Model for Refrigerant Blends, Version 5.0

December 14, 2016

Author(s)

Piotr A. Domanski, J S. Brown

As alternatives to refrigerants with a high global warming potential, blends of two or more refrigerants are being utilized as working fluids in heat-pumping

NIST Electron Elastic-Scattering Cross-Section Database, Version 4.0

September 14, 2016

Author(s)

Cedric J. Powell, Aleksander Jablonski, Francesc Salvat, Angela Y. Lee

Version 4.0 of this database (SRD 64) provides values of differential elastic-scattering cross sections, total elastic-scattering cross sections, phase shifts

NIST Standard Reference Database 49 CYCLE_D: NIST Vapor Compression Cycle Design Program Version 5.1

June 23, 2016

Author(s)

Piotr A. Domanski, J S. Brown, Eric W. Lemmon

CYCLE_D simulates vapor compression refrigeration cycles that use single-compound refrigerants or refrigerant blends. The model can simulate a basic subcritical

NIST Backscattering-Correction-Factor Database for Auger Electron Spectroscopy, Version 1.1 of SRD 154

July 1, 2015

Author(s)

Cedric J. Powell, Aleksander Jablonski

This database provides backscattering correction factors of homogeneous solids for quantitative surface analyses by Auger electron spectroscopy.

NIST Database of Cross Sections for Inner-Shell Ionization by Electron or Positron Impact

August 21, 2014

Author(s)

Cedric J. Powell, Xavier Llovet, Francesc Salvat, David Bote, Francesc Salvat-Pujol, Aleksander Jablonski

NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 9.1

May 7, 2013

Author(s)

Eric W. Lemmon, Marcia L. Huber, Mark O. McLinden

This is a new release of the NIST Standard Reference Database 23, commonly known as REFPROP. Enhancements have been made to most areas of the NIST REFPROP

TRC Thermodynamic Tables, Non-Hydrocarbon Supplement NH-102

January 11, 2010

Author(s)

Michael D. Frenkel

(1) Tbl 24-23-10-2-(1.35000)-d: Pg d-13500, New table for chloromethylsilanes for the condensed phases at one bar, or at equilibrium vapor pressure above the

TRC Thermodynamic Tables, Hydrocarbon Supplement H-138

October 19, 2009

Author(s)

Michael D. Frenkel

1. Table 23-14-2-(33.35100)-d/Page d-8950: New table for benzothiophenes, C8 to C12, containing density for the condensed phase at one bar, or at equilibrium

REFLEAK: NIST Leak/Recharge Simulation Program for Refrigerant Mixtures Version 3.2

October 16, 2009

Author(s)

David Didion, Min S. Kim, Piotr A. Domanski

REFLEAK simulates leak and recharge processes for refrigerant zeotropic mixtures, and estimates composition changes for vapor and liquid under either isothermal

TRC Thermodynamic Tables, Non-Hydrocarbons Supplement NH-101

August 3, 2009

Author(s)

Michael D. Frenkel

1. Table 23-2-1-(9.32000)-d, Pages d-6376.0 through d-6376.1: New table for cyclic carbonates, C3 to C5, for the condensed phases at one bar, or at equilibrium

CYCLE D: NIST Vapor Compression Cycle Design Program. Version 4.0. Users' Guide (NIST NSRDS 49)

May 1, 2009

Author(s)

J S. Brown, Piotr A. Domanski, Eric Lemmon

The CYCLE_D package simulates vapor compression refrigeration cycles that use pure refrigerants or mixtures of refrigerants. The model can simulate a basic

TRC Thermodynamic Tables, Hydrocarbon Supplement H-137

April 27, 2009

Author(s)

Michael D. Frenkel

1. Table 23-14-2-(33.23500)-d: Pages d-8948.0 and d-8948.1 New table for cyclohexyl phenyl sulfides containing density for the condensed phase at one bar, or at

TRC Thermodynamic Tables, Non-Hydrocarbon Supplement NH-100 (December 2008)

January 20, 2009

Author(s)

Michael D. Frenkel

1. Table 23-2-1-(1.10212)-db: Page db-5096.0 New table for 2-hexanol containing the density for the real fluid at selected temperatures and pressures. 2. Table

ThermoData Engine (TDE) version 3.0 (Pure Compounds, EOS, and Binary Mixtures)

December 31, 2008

Author(s)

Michael D. Frenkel, Robert D. Chirico, Chris Muzny, Andrei F. Kazakov, Eric Lemmon, Vladimir Diky

TheroData Engine (version 3.0) is expert-system software that implements the dynamic data evaluation concept for binary mixtures of molecular compounds

TRC Thermodynamic Tables - Hydrocarbons, Supplement H-136

October 27, 2008

Author(s)

Michael D. Frenkel

1. Table 23-2-(5.12003)-db - Pages db-2610.0 through db-2610.12: New table for 1-butene containing the density for the real fluid at selected temperatures and

REFLEAK: NIST Leak/Recharge Simulation Program for Refrigerant Mixtures. Version 3.1. User's Guide.

November 1, 2007

Author(s)

Piotr A. Domanski, David Didion, Min S. Kim

REFLEAK estimates composition changes of zeotropic mixtures in leak and recharge processes. The leak/recharge simulation program consists of three parts: 1) the

Guided Data Capture (GDC) 5.0

September 17, 2007

Author(s)

Vladimir Diky, Robert D. Chirico, Robert N. Goldberg, Michael D. Frenkel

Guided Data Capture (GDC) 5.0 includes capture capabilities for biochemical substances and selected biothermodynamic properties. A key characteristic of data

TRC Thermodynamics Tables - Hydrocarbon Supplement No. H133

April 30, 2007

Author(s)

Michael D. Frenkel

1. Table 23-2-(1.20238)-db: Pages db-1476.0 and db-1476.1 New table for 2,3-dimethylpentane containing the density for the real fluid at selected temperatures

NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0

April 2, 2007

Author(s)

Eric Lemmon, Marcia L. Huber, Mark O. McLinden

NIST23, also known as REFPROP (REference FLuid Properties), is a computer program for the calculation of thermodynamic and transport properties of fluid

ThermoData Engine (TDE)Version 2.0 (Pure Compounds with EOS support); NIST Standard Reference Database #103

December 29, 2006

Author(s)

Michael D. Frenkel, Robert D. Chirico, Vladimir Diky, Chris Muzny, Eric Lemmon, Xinjian Yan, Qian Dong

ThermoData Engine version 2.0 is an extension of NIST Standard Reference Database #103 version 1.0. The two principal new features are; (1) the capability to