Tools and Instruments

Displaying 1 - 25 of 401

NIST's million-pound deadweight stack, assembled

4.45 MN Deadweight Force Generating Machine (Million Pound Force Dead Weight Machine)

The largest of 6 NIST deadweight force generation machines, the 4.45 MN Deadweight Force Generating Machine can apply 20 equal force increments of 222 kN (or

4 m Drop Tower with Instrumented Impactor

The Security Technologies Group has a 4-m-tall drop tower that can be configured for a wide variety of impact and impact-related testing. This drop tower is

8M Combo Torch & 3B-B Air/Gas Torch

The surface bench torch uses a combination of propane and oxygen. The surface bench torch comes standard with a swivel ball mounting on a stable, cast steel U

Aberration-Corrected Transmission Electron Microscope (TEM)

Probe corrected 200kV analytic electron microscope Resolves single atoms Chemical analytic capability (EELS, EDS) Highest resolution in electron optics (<0.1 nm

Accucold FF6 Refrigerator

Access Information Refrigerators and freezers are available in the laboratories for storing temperature sensitive samples shortly before, during and shortly

Accumet Research Model AR25 pH Meter

Accumet Research Model AR25 pH Meter. Please see manual.

Ace Glass UV Photochemistry Safety Cabinet and Power Supply

Location: N/A

Across International AT09-UL Vacuum Drying Oven

This piece of equipment must be signed out prior to use. Please see manual.

Additive Manufacturing Metrology Testbed (AMMT)

The NIST Additive Manufacturing Metrology Testbed is a fully custom, open-platform laser powder bed fusion (LBPF) system to advance monitoring, controls, and

Additive Manufacturing Powder Metrology Laboratory

NIST researchers are developing and deploying test methods, protocols, and exemplar data for characterizing the properties of metal powders used in commercial

Additive Manufacturing Research Center (AMRC)

The Metal Additive Manufacturing (AM) Research Facility is now called the Additive Manufacturing Research Center (AMRC). Additive manufacturing gives U.S

Advanced infrared radiometry and imaging (AIRI)

Radiation thermometers and blackbodies can be calibrated using a set of blackbodies. These blackbodies can vary in size and can be fixed-points of the ITS-90 or

Air Control Inc. Microvoid 4F-55 Fume Hood

Please refer to the instruction manual for further information.

Plot of aluminum oxide photodetector typical responsivity in the EUV.

Aluminum Oxide EUV Photodetector Transfer Standard

Aluminum oxide (Al 2O 3) photodiodes are issued by NIST as transfer standard detectors in the extreme ultraviolet spectral region (5 nm to 125 nm). Each device

Analytical Electron Microscope

The Titan 80-300 is a transmission electron microscope (TEM) equipped with spectroscopic detectors to allow chemical, elemental, and other analytical

Anton Paar DMA 5000 Density Meter

This instrument is used to perform accurate density measurements over a specified density, temperature, and viscosity range. At the end of an analysis, the

Anton Paar SAXess X Ray Device

Apparatus for the Measurement of High Temperature Thermoelectric Transport Properties

Description The Seebeck coefficient is a widely measured transport property that provides fundamental information on charge carrier transport and the electronic

$AR200 Refractometer meter E136$

AR200 Refractometer meter

Reichert AR200 Digital Handheld Refractometer has the capability to measure RefractiveIndex (nD) of liquid solutions to a precision of +/- 0.0001 or % Solids

ATI Orion Model 130 Conductivity Meter

Please refer to the owner's manual for further information.

Atom Probe Tomography (LEAP 4000X Si/HR – Local Electrode Atom Probe)

LEAP 4000X Si/HR Imaging time-of-flight mass spectrometer and field ion microscope. Can deliver 3-D, isotopically- and chemically- resolved images Sub-nanometer

Avanti Custom Mini Extruder

Custom modified. The Avanti Mini- Extruder allows researchers and scientists to prepare large, unilamellar vesicles by extrusion in an efficient, rapid manner.

Baker Biochem GARD Biosafety Cabinet

Baker Biochem GARD Biosafety Cabinet. Please see manual.

Barnstead Lab-Line 3608-5 Oven

Please refer to the owner's manual for further information.

Barnstead MicroPure UV Water Purification System

Barnstead MicroPure UV Water Purification System. Please see manual.

Advanced communications
-Open Radio Access Network (Open-RAN)
-Quantum communications
-Spectrum sharing
-Wireless (RF)
Bioscience
-Bioeconomy
--Biological data
-Bioimaging
-Bioinformatics
-Biomanufacturing
-Biomaterials
-Biometrology
-Biosecurity
--Biosurveillance
--Genomic cybersecurity
--Nucleic acid sequence screening
-Cell measurements
-Engineering / synthetic biology
--Biofabrication
--Cell-free systems
--Genome engineering
--Protein engineering
-Gene delivery systems
-Genome editing
-Genomics
-Glycomics
-Metabolomics
-Microbial measurements
-Proteomics
-Transcriptomics
Buildings and Construction
-Building codes and standards
-Building control systems
-Building damage and repair
-Building economics
-Building materials
-Energy efficiency
-Heating, ventilation and air conditioning equipment
-Indoor air quality
-Structural engineering
-Thermal comfort
Chemistry
-Analytical chemistry
-Chemical engineering and processing
-Chemical thermodynamics and chemical properties
-Molecular characterization
-Theoretical chemistry and modeling
-Thermochemical properties
Electronics
-Electromagnetics
-Flexible electronics
-Magnetoelectronics
-Optoelectronics
-Organic electronics
-Semiconductors
-Sensors
-Superconducting electronics
Energy
-Alternative energy
-Conventional energy
-Electric power / smart grid
-Fuels
Environment
-Air / water / soil quality
-Climate Measurements
-Environmental health
-Greenhouse gas measurements
-Marine science
-Sustainability
Fire
-Fire detection
-Fire dynamics and science
-Fire fighting
-Fire modeling
-Fire risk reduction
-Materials flammability
-Structural fire resistance
-Wildland urban interface fire
Forensic Science
-Digital evidence
-Drugs and toxicology
-Firearms and toolmarks
-Forensic biometrics
-Forensic genetics
-Trace evidence
Health
-Biopharmaceuticals
-Cell and gene therapy
-Clinical diagnostics
--Cancer
--Medical imaging
-Food and nutrition
-Human microbiome
-Precision medicine
-Regenerative medicine and advanced therapy
--Flow cytometry
Information technology
-Artificial intelligence
--AI measurement and evaluation
--Applied AI
--Fundamental AI
--Hardware for AI
--Machine learning
--Trustworthy and responsible AI
-Biometrics
-Cloud computing and virtualization
-Complex systems
-Computational science
-Conformance testing
-Cyber-physical systems
--Smart cities
-Cybersecurity
--Cryptography
--Cybersecurity education and workforce development
--Cybersecurity measurement
--Identity and access management
--Privacy engineering
--Risk management
--Securing emerging technologies
--Trustworthy networks
--Trustworthy platforms
-Data and informatics
--Human language technology
--Information retrieval
--Natural language processing
-Federal information processing standards (FIPS)
-Health IT
-Internet of Things (IoT)
-Interoperability testing
-Location based services
-Mobile
-Networking
--Mobile and wireless networking
--Network management and monitoring
--Network modeling and analysis
--Network security and robustness
--Network test and measurement
--Next generation networks
--Protocol design and standardization
--Software defined and virtual networks
-Privacy
-Software research
--Software testing
-Usability and human factors
--Accessibility
-Video analytics
-Virtual / augmented reality
-Visualization research
-Voting systems
Infrastructure
Manufacturing
-Additive manufacturing
-Factory communications
-Factory operations planning and control
-Interoperability in manufacturing
-Machining
-Manufacturing economics
-Manufacturing quality assurance
-Manufacturing systems design and analysis
-Monitoring, diagnostics and prognostics
-Process improvement
-Process measurement and control
-Product data
-Robotics in manufacturing
--Agility and adaptability
--Collaborative robots
--Dexterous grasping
--Manipulation
--Mobility and industrial autonomous vehicles
--Navigation / actuation / control
--Sensing and perception
-Supply chain
-Sustainable manufacturing
-Systems engineering
-Systems integration
-Technology commercialization
Materials
-Ceramics
-Composites
-Concrete / cement
-Materials characterization
--Composition and structure
--Mechanical properties
--Thermal properties
-Metals
-Modeling and computational material science
-Polymers
-Superconductors
Mathematics and statistics
-Experiment design
-Image and signal processing
-Modeling and simulation research
-Numerical methods and software
-Statistical analysis
-Uncertainty quantification
Metrology
-Amount of substance
-Dimensional metrology
-Electrical / electromagnetic metrology
-Flow metrology and rheology
-Force metrology
-Humidity metrology
-Ionizing radiation metrology
-Mass metrology
-Metric
-Optical / photometry / laser metrology
-Pressure and vacuum metrology
-Thermometry metrology
-Time and frequency metrology
-Weights and measures
Nanotechnology
-Nanobiotechnology
-Nanochemistry
-Nanoelectronics
-Nanofabrication / manufacturing
--Lithography
--Self-assembly
-Nanofluidics
-Nanomagnetics
-Nanomaterials
-Nanomechanics
-Nanometrology
-Nanophotonics
-Nanophysics
-Nanoplasmonics
Neutron research
Performance excellence
-Assessment tools and services
-Baldrige award
-Baldrige examiners
-Baldrige Framework and Criteria
-Best practices
-Leadership development
Physics
-Atomic / molecular / quantum
-Biological physics
-Condensed matter
-Electron physics
-Magnetics
-Nuclear physics
-Optical physics and communications
-Quantum information science
-Radiation
-Spectroscopy
-Thermodynamics
-Time and frequency
Public safety
-Chemical / Biological / Radiological / Nuclear / Explosives (CBRNE)
-First responder preparedness
-Law enforcement
-Public safety communications research
-Response robots
Resilience
-Community resilience
--Recovery
--Resilience metrics
-Disaster and failure studies
-Earthquake risk reduction
-Resilience economics
-Resilient materials
-Windstorm impact reduction
Standards
-Accreditation
-Calibration services
-Conformity assessment
-Documentary standards
-Frameworks
-Quality assurance
-Reference data
-Reference instruments
-Reference materials
-Standards education
Technology transfer
Transportation
-Aerospace
-Automotive