Thermal Stability of Titanium Contacts to MoS2

Published

August 30, 2019

Author(s)

Huairuo Zhang, Albert Davydov, Leonid A. Bendersky, Keren M. Freedy, Stephen J. McDonnell

Abstract

Thermal annealing of Ti contacts is commonly implemented in the fabrication of MoS2 devices however its effects on interface chemistry have not been previously reported in the literature. In this work, the thermal stability of titanium contacts deposited on geological bulk single crystals of MoS2 in ultra-high vacuum (UHV) is investigated with X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM). In the as-deposited condition, the reaction of Ti with MoS2 is observed resulting in a diffuse interface between the two materials that is comprised of metallic molybdenum and titanium sulfide compounds. Annealing Ti/MoS2 sequentially at 100 °C, 300 °C, and 600 °C for 30 min in UHV results in a gradual increase in the reaction products as measured by XPS. Accordingly, STEM reveals the formation of a new ordered phase and a Mo rich layer at the interface following heating. Due to the high degree of reactivity, the Ti/MoS2 interface is not thermally stable even at transistor operating temperatures of 100 °C, while post-deposition annealing further enhances the interfacial reactions. These findings have important consequences for electrical transport properties, highlighting the importance of interface chemistry in the metal contacts design and fabrication.

Citation

ACS Applied Materials and Interfaces

Pub Type

Journals

Keywords

MoS2, Thermal Stability, XPS, STEM

Citation

Zhang, H. , Davydov, A. , Bendersky, L. , Freedy, K. and McDonnell, S. (2019), Thermal Stability of Titanium Contacts to MoS2, ACS Applied Materials and Interfaces (Accessed March 13, 2025)