Yeung, H.
, Lane, B.
, Donmez, M.
and Moylan, S.
(2020),
In-situ calibration of laser/galvo scanning system using dimensional reference artefacts, CIRP Annals-ManufacturingTechnology, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=929916
(Accessed December 26, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
In-situ calibration of laser/galvo scanning system using dimensional reference artefacts
Published
Author(s)
, , ,
Abstract
Laser powder bed fusion systems use a high-power laser, steered by two galvanometer (galvo) mirrors to scan a pattern on metal powder layers. Part geometric tolerances depend on the positioning accuracy of the laser/galvo system. This paper describes an in-situ calibration technique utilizing a camera coaxially aligned with the laser imaging a dimensional reference artefact. The laser positions are determined from the images captured by the camera while scanning the artefact. The measurement uncertainty is estimated using simulations. The in-situ calibration results are compared with the results obtained from the typical 'burn and measure' galvo calibration method.Citation
CIRP Annals-ManufacturingTechnology
Pub Type
Journals
Download Paper
Keywords
Selective laser melting (SLM), Positioning, Galvo Calibration
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created May 16, 2020, Updated October 7, 2020