Outcalt, S.
and Fortin, T.
(2012),
Density and Speed of Sound Measurements of Four Bio-derived Fuels, Journal of Chemical and Engineering Data, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=911572
(Accessed December 28, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Density and Speed of Sound Measurements of Four Bio-derived Fuels
Published
Author(s)
,
Abstract
Compressed-liquid densities and ambient pressure densities and speeds of sound of four biomass-derived fuels have been measured. The compressed-liquid measurements were made from 270 K to 470 K, and 0.5 MPa to 50 MPa. The ambient pressure measurements were made from 278 K to 343 K. Compressed-liquid density data at 10 MPa and below were extrapolated to 0.083 MPa and in combination with the ambient pressure data fit to a Rackett equation to allow for comparison of the two sources of data. Additionally, the compressed-liquid density data have been correlated to a Tait equation and parameters are given for each fuel.Citation
Journal of Chemical and Engineering Data
Volume
57
Pub Type
Journals
Download Paper
Keywords
Biofuel, Brown Grease, Camelina, Castor Oil, Compressed-liquid, Density, Hydro-treated Renewable Jet Fuel, HRJ, Speed of Sound, Vibrating-tube densimeter
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created September 13, 2012, Updated June 2, 2021