Low-frequency noise in gallium nitride nanowire mechanical resonators

Published

December 7, 2012

Author(s)

Jason Gray, Kristine A. Bertness, Norman Sanford, Charles T. Rogers

Abstract

We report on the low-frequency 1/f (flicker) parameter noise displayed by the resonance frequency and resistance of doubly clamped c-axis gallium nitride nanowire (NW) mechanical resonators. The resonators are electrostatically driven and their mechanical response is electronically detected via NW piezoresistance. With an applied dc voltage bias, a NW driven near its mechanical resonance generates a Lorentzian current signal which, when lock-in detected, displays a modulated, drive-frequency-dependent 1/f noise component. This noise is proportional to the square of the derivative of the Lorentzian lineshape with a magnitude highly dependent on NW dc bias voltage conditions, consistent with noise in the NW's resistance leading to temperature, and hence resonance frequency noise due to local Joule heating. An example device with a 27.8 MHz resonance frequency and 220 kΩ} resistance experiences an approximate resonance frequency shift of -5.8 Hz/nW. In terms of NW resistance change, this corresponds with shifts of 0.1 Hz/Ω} and 2.6 Hz/Ω} at 1 V bias and 4 V bias, respectively, with an average resistance fluctuation of 1 kΩ} in a 1-second bandwidth.

Citation

Applied Physics Letters

Volume

101

Pub Type

Journals

Download Paper

Local Download

Keywords

gallium nitride nanowires, nanomechanical resonators, 1/f noise

Citation

Gray, J. , Bertness, K. , Sanford, N. and Rogers, C. (2012), Low-frequency noise in gallium nitride nanowire mechanical resonators, Applied Physics Letters, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=909950 (Accessed December 26, 2024)