Contact Fracture of Brittle Bilayer Coatings on Soft Substrates

Published

January 1, 2001

Author(s)

P Miranda, Antonia Pajares, F Guiberteau, F Cumbrera, Brian R. Lawn

Abstract

Contact-induced fracture modes in trilayers consisting of a brittle bilayer coating on a soft substrate was investigated. Experiments are performed on model transparent glass/sapphire/polycarbonate structures bonded with epoxy adhesive, to enable in situ observation during the contact. Individual layer surfaces were preferentially abraded to introduce uniform flaw states and so allow each crack type to be studied separately and controllably. Fracture occurs by cone cracking at the top glass surface or by radial cracking at the bottom glass or sapphire bottom surfaces. Critical loads for each crack type were measured, the fixed glass thickness and several specified sapphire thicknesses. Finite element modeling (FEM) was used to evaluate the critical load data for radial cracking, using as essential input material parameters evaluated from characterization tests on constituent materials and supplemental glass/polymer and sapphire/polymer bilayer structures. The FEM calculations demonstrate pronounced stress transfer from the applied contact to the underlying sapphire layer, explaining a tendency for preferred fracture of this relatively stiff component. Factors affecting the design of optimal trilayer structures for maximum fracture resistance of practical layer systems were considered.

Citation

Journal of Materials Research

Volume

16

Issue

No. 1

Pub Type

Journals

Keywords

brittle coatings, coating fracture, cone cracks, glass, indentation, radial cracks, sapphire, trilayers

Citation

Miranda, P. , Pajares, A. , Guiberteau, F. , Cumbrera, F. and Lawn, B. (2001), Contact Fracture of Brittle Bilayer Coatings on Soft Substrates, Journal of Materials Research (Accessed March 14, 2025)