Irwin, K.
and Huber, M.
(2001),
SQUID Operational Amplifier, IEEE Transactions on Applied Superconductivity, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=6767
(Accessed November 30, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
SQUID Operational Amplifier
Published
Author(s)
,
Abstract
The nonlinear response of Superconducting Quantum Interface Devices (SQUIDs) has limited their usefulness. We propose the SQUID Operational Amplifier, which consists of several stages of SQUIDs with high open-loop current gain. When connected in a negative-feedback configuration by passing some of the output current through a feedback coil connected to the first stage, the response is linearized. An analog of the semiconductor op-amp, the SQUID op-amp can be used in superconducting equivalents of op-amp circuits such as current amplifiers, current-to-voltage converters, differentiators, and integrators. We present experimental results with a x 10 current amplifier as well as a 750 ohm} current-to-voltage amplifier which can couple directly to a room-temperature amplifier without a transformer or a feedback line.Citation
IEEE Transactions on Applied Superconductivity
Volume
11
Issue
1
Pub Type
Journals
Download Paper
Keywords
feedback circuts, SQUIDS, superconducting devices
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created February 28, 2001, Updated October 12, 2021