Related Metrology Standards

The following are standards related to our areas of metrology. This material is copyrighted and you are referred to the particular standard crafting organization for copies of them. If you are searching for a particular standard that is not included in this list, please michael.moldover [at] nist.gov (contact us) an we will try to direct your query.

---

ISO 17.060
Measurement of volume, mass, density, viscosity 
Including measuring instruments

ISO 649-1:1981
Laboratory glassware -- Density hydrometers for general purposes -- Part 1: Specification

ISO 649-2:1981
Laboratory glassware -- Density hydrometers for general purposes -- Part 2: Test methods and use

ISO 650:1977
Relative density 60/60 degrees F hydrometers for general purposes

ISO 1768:1975
Glass hydrometers -- Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)

ISO 3105:1994
Glass capillary kinematic viscometers -- Specifications and operating instructions

ISO 3507:1999
Laboratory glassware -- Pyknometers

ISO/TR 3666:1998
Viscosity of water

ISO 4801:1979
Glass alcoholometers and alcohol hydrometers not incorporating a thermometer

ISO 15212-1:1998
Oscillation-type density meters -- Part 1: Laboratory instruments

ISO/TR 20461:2000
Determination of uncertainty for volume measurements made using the gravimetric method

---

ISO 17.120.01
Measurement of fluid flow in general

ISO/TR 7066-1:1997
Assessment of uncertainty in calibration and use of flow measurement devices -- Part 1: Linear calibration relationships

---

ISO 17.120.10
Flow in closed conduits
Gas meters in buildings, 91.140.40
  Water meters in buildings, 91.140.60

ISO/TR 3313:1998
Measurement of fluid flow in closed conduits -- Guidelines on the effects of flow pulsations on flow-measurement instruments

ISO 4006:1991
Measurement of fluid flow in closed conduits -- Vocabulary and symbols

ISO 4185:1980
Measurement of liquid flow in closed conduits -- Weighing method

ISO 5167-1:1991
Measurement of fluid flow by means of pressure differential devices -- Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full

ISO 5167-1:1991/ Amd 1:1998
ISO/TR 5168:1998
Measurement of fluid flow -- Evaluation of uncertainties

ISO 6817:1992
Measurement of conductive liquid flow in closed conduits -- Method using electromagnetic flowmeters

ISO 7066-2:1988
Assessment of uncertainty in the calibration and use of flow measurement devices -- Part 2: Non-linear calibration relationships

ISO 8316:1987
Measurement of liquid flow in closed conduits -- Method by collection of the liquid in a volumetric tank

ISO 9104:1991
Measurement of fluid flow in closed conduits -- Methods of evaluating the performance of electromagnetic flow-meters for liquids

ISO 9300:1990
Measurement of gas flow by means of critical flow Venturi nozzles

ISO 9368-1:1990
Measurement of liquid flow in closed conduits by the weighing method -- Procedures for checking installations -- Part 1: Static weighing systems

ISO/TR 9464:1998
Guidelines for the use of ISO 5167-1:1991

ISO 9951:1993
Measurement of gas flow in closed conduits -- Turbine meters

ISO 9951:1993/Cor 1:1994
ISO 10790:1999
Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)

ISO 11631:1998
Measurement of fluid flow -- Methods of specifying flowmeter performance

ISO/TR 12764:1997
Measurement of fluid flow in closed conduits -- Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full

ISO/TR 12765:1998
Measurement of fluid flow in closed conduits -- Methods using transit-time ultrasonic flowmeters

ISO/TR 12767:1998
Measurement of fluid flow by means of pressure-differential devices -- Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1

ISO 14511:2001
Measurement of fluid flow in closed conduits -- Thermal mass flowmeters

ISO/TR 15377:1998
Measurement of fluid flow by means of pressure-differential devices -- Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1

ISO/TR 15377:1998/Cor 1:1999

---

ISO 75.180.30
Volumetric equipment and measurements

ISO 2714:1980
Liquid hydrocarbons -- Volumetric measurement by displacement meter systems other than dispensing pumps

ISO 2715:1981
Liquid hydrocarbons -- Volumetric measurement by turbine meter systems

ISO 4124:1994
Liquid hydrocarbons -- Dynamic measurement -- Statistical control of volumetric metering systems

ISO 7278-2:1988
Liquid hydrocarbons -- Dynamic measurement -- Proving systems for volumetric meters -- Part 2: Pipe provers

ISO 9200:1993
Crude petroleum and liquid petroleum products -- Volumetric metering of viscous hydrocarbons

ISO 9403:2000
Crude petroleum -- Transfer accountability -- Guidelines for cargo inspection

---

ASTM Standards

ASTM E100-95
Standard Specification for ASTM Hydrometers

ASTM E126-92
Standard Test Method for Inspection and Verification of Hydrometers

ASTM E542-00
Standard Practice for Calibration of Laboratory Volumetric Apparatus

ASTM E694-99
Standard Specification for Laboratory Glass Volumetric Apparatus

---

Manual of Petroleum Measurement Standards