Ravikiran, A.
and Jahanmir, S.
(2000),
Effect of Interfacial Layers on Wear Behavior of a Dental Glass-Ceramic, Journal of the American Ceramic Society
(Accessed March 13, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Effect of Interfacial Layers on Wear Behavior of a Dental Glass-Ceramic
Published
Author(s)
A Ravikiran,
Abstract
Wear studies on a glass-ceramic dental restorative material were performed under two types of lubrication conditions with distilled water. In one set of experiments, the contact interface was continuously flushed with fresh water to remove the wear debris. In a second set of experiments, the water was not replaced during the testing period. Flushing resulted in a lower friction coefficient and more than twice the wear volume compared to the non-flushing condition. Examination of the worn surfaces in SEM confirmed the presence of an interfacial layer at the sliding interface for the non-flushing experiments. These results suggest that the specific conditions at the sliding interfaces and particularly the nature of interfacial layers must be considered when evaluating the tribological performance of ceramics and especially when the wear data from different studies are compared.Citation
Journal of the American Ceramic Society
Volume
83 No. 7
Pub Type
Journals
Keywords
ceramics, glass-ceramic, interfacial layers, wear, wear debris
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created June 30, 2000, Updated October 12, 2021