Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Arsenic and Antimony Implantations in SiC

Published

Author(s)

J R. Tucker, M Rao, O W. Holland, P Chi, N A. Papanicolaou, J A. Freitas

Abstract

Single and multiple energy As and Sb implantations were performed into p-type 6H-SiC epitaxial layers at room temperature (RT) and 800 degrees C. Secondary ion mass spectrometry measurements showed severe out-diffusion of the implants for annealing temperatures >1500 degrees C. Rutherford backscattering spectrometry (RBS) measurements indicated a high degree of residual lattice damage for RT implantations even after 1600 degrees C annealing while less damage was detected in 800 degrees C implanted samples. Electrical activations of 11% and 20% were measured for 800 degrees C As and Sb implantations annealed at 1500 degrees C, respectively. The Schottky capacitance-voltage profiling measurements indicated solid solubility limits in the low 1018 cm-3 range for both As and Sb. Based on the experimental data, carrier ionization energies of 80 meV and 67 meV were estimated for As and Sb donors, respectively. Vertical n-p junction diodes were made by using multiple energy As and Sb implanted epitaxial layers. The diodes were characterized by variable temperature current-voltage measurements.
Citation
Journal of Applied Physics

Keywords

implantation, Rutherford back scattering, secondary ion mass spectrometry, silicon carbide

Citation

Tucker, J. , Rao, M. , Holland, O. , Chi, P. , Papanicolaou, N. and Freitas, J. (2021), Arsenic and Antimony Implantations in SiC, Journal of Applied Physics (Accessed July 27, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created October 12, 2021